Maxxis Ardent – Mounted

Component Reviews, Industry News, Reviews | 198 | May 3, 2008 at 8:48 am

I finally got a chance to take a really good look at the Maxxis Ardents…mounted, weighed and measured.

  • Bike:  Ventana El Terremoto 6.0
  • Front Wheel:  Chris King 20mm Hub with DT Swiss 5.1d Rim (27.8mm wide)
  • Rear Wheel:  Chris King HD Fun Bolt with Mavic EX 823 (30mm wide)
  • Front Fork:  Rock Shox Lyrik Coil U-Turn 115-160mm
  • Front Tire:  Maxxis Ardent 2.6 DH 3c
  • Rear Tire:  Maxxis Ardent 2.4 DH 60a

Note:  Results will vary depending on tire and rim.

MAXXIS ARDENT INITIAL IMPRESSIONS

They are relatively light for DH tires.  Both the 2.6 and 2.4 weighed in at 2 lbs 14 oz (roughly 1304g) which really isn’t that bad for tires this large with thick DH casings.  After the weigh in, I removed the Maxxis 2.35 High Roller UST’s and mounted up the Ardents.  The Ardents went on much easier than the High Rollers they replaced.  I didn’t even need to use tire levers.  In comparison to the High Rollers, the Ardents are much larger with a lot more volume.  This is a welcomed change because the “claimed” 2.35 High Rollers really only measured out to about 2.2 and the volume was much less than the other 2.35′s on the market.  It appears that Maxxis is really making an effort on claimed vs. actual specs this year.

HOW DO THEY MEASURE UP?

Measurement Specs (pictures below):

  • Front 2.6 Casing Width:  2.210 in. @ 28 psi
  • Front 2.6 Tread Width:  2.522 in. @ 28 psi
  • Rear 2.4 Casing Width:  2.175 in. @ 28 psi
  • Rear 2.4 Tread Width:  2.317 in. @ 28 psi

Now, these measurements will vary slightly depending on rim choice.  My 2.6 is measuring out smaller on the 5.1d (27.8mm wide) than it would on an 823 (30mm wide).  The rear 2.4 width on the 823 is pretty close to what you should find on most DH rims.  The full labeled production versions should be very close to this set.

198′S THOUGHTS

So far, these tires look great.  The tread pattern is the best that I have seen out of the Maxxis camp so far, and I am really hoping that they rail the corners with lower rolling resistance than the High Rollers or Minions.  I will be taking the bike to the Big Creek freeride area to check their rock garden and drop performance and then a couple of laps around the cross country course for some overall performance testing.  These tires have increased my patience line on the UST Big Betty’s that were supposed to be in our hands Jan. ’08.  I am starting to think Schwalbe meant Jan. ’09.  Stay tuned for full ride reports and final thoughts.

Side note: For those of you with Lyrik’s or Terremoto’s, I included stay and fork clearance pictures.

Do you want to become a faster and better rider?

Becoming faster on the mountain bike trail requires some sort of program or focus. Luckily for us, James Wilson (pro MTB trainer) put together the The Ultimate MTB Workout that will get you over that speed hump and make you a faster mountain biker. This affordable and extremely comprehensive program is exactly what you are looking for to bring the speed out of your legs and against the dirt whether you are a recreational rider or racer. Click here to check out The Ultimate MTB Workout Program.

If you are looking to increase your riding skills, Ramped Riding is a 135 page eBook packed with over 15 years worth of mountain biking experience that will make you a better rider instantly, guaranteed. Click Here To Check Out Ramped Riding

SPONSORS

Did you know?

By clicking on our links then shopping at JensonUSA, Hunk N Roll, Chainlove, and Amazon, you are helping Bike198. We use them and LBS's for our gear. Thank you for supporting the crew at Bike198.
  • ta
    Those tires look massive! But I like the look and sound of them real volume tires again would be nice, look forward to the full ride report RS..

    40lbs Eric he might as well go for the EL Cuervo! LOL.
  • @Brian:
    I agree on the scale, but it was the only one I could get a hold of at the time. I will have an Ultimate shortly to get more accurate results.
    Edited to include PSI.
    It is...typo on my part. Thanks for catching it.
  • Brian
    Rapala scales are a joke. The tire casing size you measured depends on the PSI as well which wasn't mentioned? Why a 3c rear and a 60a front? Seems like it should be reversed?
  • Erik
    Dude, dont be a wuss...go for 40 lbs!
blog comments powered by Disqus
Tags: , , , , , , , , , , , , , , , , ,